Declutter your gaming setup and protect your hardware. We professionally mount any console—PS5, Xbox Series X/S, or Nintendo Switch—behind your TV or on any wall surface.
Think of your gaming console as the high-performance engine of your entertainment system. You wouldn’t leave a precision engine sitting on the floor in a pile of dust—your console deserves the same respect. Professional mounting moves your hardware from the “clutter zone” to the “performance zone.”
You don’t need to spend hours researching brackets or worrying about compatibility. Our technicians carry a full inventory of high-grade, ventilated mounts designed for every major console. We’ll help you decide on-site whether you want your tech hidden for a clean look or displayed as the centerpiece of your gaming cave.
While modern controllers use Bluetooth and RF signals that don’t require a direct line of sight, metal and dense electronics can still cause interference.
The Strategy: We position your console away from large metal objects or dense wiring bundles. By mounting it near the edge of your TV rather than directly behind the thickest part of the screen, we ensure your controller response remains lightning-fast with zero input lag.
If you still love physical media, placement is everything.
The Strategy: We don’t just hide the console; we orient the disc slot toward the most accessible side of the TV. Whether you’re right or left-handed, we ensure there’s enough “hand clearance” to swap games without having to move the TV or squeeze into tight gaps.
Heat is the #1 killer of gaming hardware. We never mount a console “flush” or “tight” against the back of a warm TV.
The Strategy: We maintain a specific 2 to 3-inch ventilation gap between the wall and the TV. This creates a “chimney effect” where cool air is pulled in from the bottom and hot air is exhausted out the top, preventing the console from re-breathing its own heat.
Your console needs to talk to your TV, your internet, and sometimes your VR headset.
The Strategy: We map out the “Cable Path” before we drill. We ensure your HDMI 2.1 cables have enough slack to prevent port strain and that your USB ports remain accessible for charging controllers or plugging in external hard drives.
Many gamers think mounting a console is as simple as “peel and stick” or “screw and go.” However, we get calls every week to repair walls or—worse—help recover data from consoles that have crashed to the floor. Avoid these three common pitfalls by letting a professional handle the heavy lifting.
We treat your gaming hardware with the same precision as a high-end home theater. Our technicians follow a specialized 5-point protocol to ensure your console is secure, cool, and perfectly integrated into your setup.
A wall-mounted console looks great, but the aesthetic is ruined if your controllers, headsets, and charging cables are still scattered across the coffee table. We offer integrated organization solutions to turn your wall into a fully functional, high-tech hub.
Stop digging through couch cushions. We install custom-fitted cradles for your PS5 DualSense, Xbox Wireless Controllers, or Nintendo Pro Controllers.
The Benefit: These mounts keep your analog sticks safe from being pressed or damaged while not in use. We can position them symmetrically around your TV or tucked discreetly to the side for easy access.
Gaming headsets are bulky and easily stepped on.
The Benefit: We install heavy-duty, rubberized hooks designed to hold any headset—from Astro and Turtle Beach to SteelSeries and Sony Pulse. This keeps the headband shape intact and the ear cups away from dust and spills.
Tired of “Low Battery” warnings in the middle of a match?
The Benefit: We can mount your dual-charging docks directly to the wall or underside of a shelf. By hardwiring these stations into your hidden power source, we ensure your controllers are always charged and ready to go, with zero visible charging cables.
For those who use their console as a streaming hub or VR powerhouse.
The Benefit: We provide specialized clips for Media Remotes and protective wall-mounts for VR headsets and Sense controllers. Everything has a dedicated home, ensuring your living room stays “Guest Ready” even after a marathon gaming session.
Gaming consoles are precision instruments, not just “boxes” to be hung on a wall. While a general handyman might treat your PS5 like a spice rack, at Same Day Installations we understand the specific hardware needs of a high-end gaming setup.
| Feature | Same Day Pros (Us) | Gig Apps / General Handymen |
| Hardware Expertise | Full-Time Specialists. We understand thermal vent maps, HDMI 2.1 bandwidth, and controller signal interference. | Jack of all trades. Usually have no specific training in electronics or console-specific safety. |
| Mounting Inventory | Custom Brackets. Our vans are stocked with steel-reinforced, console-specific mounts for PS5, Xbox, and Switch. | DIY Shelves. They often use generic “L-brackets” or floating shelves that don’t secure the console. |
| Thermal Protection | Airflow Focused. We guarantee a “cooling gap” to prevent overheating and thermal throttling. | Aesthetic Only. They may mount the console flush against a warm TV, causing hardware failure. |
| Safety Standards | No Adhesives. We use mechanical steel fasteners. We never use Velcro or tape that fails under heat. | “Peel & Stick.” Many gig workers use adhesive strips that melt over time, leading to crashes. |
| Liability | Fully Licensed & Insured. If we scratch your console or hit a wire, you are 100% covered. | “At Your Own Risk.” Most apps distance themselves from damage claims, leaving you with the repair bill. |
| Cleanliness | Clean-Room Standard. We use specialized vacuums to ensure zero drywall dust gets into your console’s fans. | Messy Drills. Dust left behind can be sucked into your console, causing internal buildup. |
Not when installed by our experts. We maintain a specific 2–3 inch "ventilation gap" between the wall and the TV. This ensures a steady flow of cool air reaches the intake vents and prevents the console from "re-breathing" the warm exhaust air from the back of the TV.
No. Modern controllers for the PS5, Xbox Series X|S, and Nintendo Switch use Bluetooth and Radio Frequency (RF) signals. These signals pass easily through glass and plastic. We also position the console near the edge of the TV frame to ensure zero input lag during competitive play.
Absolutely. While there were early internet rumors regarding liquid metal leaks, these were largely debunked when using high-quality, level mounts. Our brackets utilize the official base-screw mounting point provided by Sony to ensure the console is structurally supported and perfectly upright.
Yes. Our technicians carry specialized masonry bits and heavy-duty anchors designed specifically for brick, stone, and concrete. Whether it's above a fireplace or on an accent wall, we ensure a rock-solid installation.
For older consoles (like the Xbox One or some retro systems) that have bulky external power bricks, we use "Brick Brackets" to hide the power supply behind the TV or underneath your media console, keeping the entire look wire-free.
You don't have to! Our vans are fully stocked with professional-grade, steel-reinforced mounts for all current-gen consoles. If you already purchased one, we are happy to install it for you, provided it meets our safety standards.
Yes. If you have a drywall setup, we can install an In-Wall Power Bridge and route your HDMI cables behind the studs for a "floating" look. If you are in a rental or have brick walls, we offer sleek, paintable raceways to keep the cables organized and out of sight.
We prioritize accessibility. During Step 2 of our installation process, we mark the placement to ensure the disc slot is facing outward and is easily reachable from the side of the TV without you having to move the screen.
